The hottest packaging safety standard in China lag

2022-10-13
  • Detail

China's packaging safety standards lag behind and are actively improving

nowadays, a standardized market demanding health and safe consumption is taking shape in China, and actively improving the standard system has become an urgent task for the packaging industry. The level of standardization is not only a reflection of the level of industrial development, but also conducive to promoting the healthy development of the industry

it is reported that recently, food packaging manufacturers and packaging industry associations in various parts of China have been relatively depressed, and packaging has become a stumbling block to food exports, mainly due to the lagging national food packaging safety standards

with the expansion and development of international trade, standardization has become an important tool for international market competition. At the end of 2006, the European Union issued a draft regulation on transitional limit standards for plasticizers in cover mats intended to be used in contact with food (hereinafter referred to as circular 301), which put forward new limit regulations for materials in contact with food. Previously, some exported foods in Ningbo were returned because the packaging materials did not meet the standards specified in circular 301

at present, the user scope of China's GB "safety and hygiene requirements for heat resistant glass appliances" and GB "Hygienic standard for the use of additives for food containers and packaging materials" is even larger, and the scope of the specified items is narrow. The plasticizers, nucleating agents, and silver glass listed in the notification are not specified in these two standards, and the hygienic standards for exported glass and plastic products in contact with food are blank

according to the personnel of the national packaging product quality supervision and inspection center, China's standards related to food and drug packaging are relatively backward, and only more than 30 of the more than 80 standards were established after 2000. It can be seen that food packaging samples with small volume and small tension can be selected. The safety standard of our single column tension machine needs to be improved

the industry is paying close attention to the construction of the standard system

fortunately, more and more people in the industry have recognized the importance of standards, and a series of standards have gradually surfaced, or are brewing

the framework structure of China's import and export food packaging industry standard system has been established, and the "provisions on the administration of inspection and supervision of import and export food packaging containers and packaging materials" has been implemented since August 1 this year. All packaging containers and packaging materials used for import and export food must undergo strict inspection, quarantine, supervision and management

according to the announcement of the national development and Reform Commission (No. 16, 2007), the industry standards of "general principles of multi-layer co extrusion barrier film for packaging", "aluminum pesticide bottles for packaging containers", "plastic logistics turnover boxes", "plastic pesticide bottles for packaging containers", "packaging of pulp molded products for industrial products", "combined anti-counterfeiting bottle caps" have been approved and issued on March 6, and will be implemented from September 1

on April 10, the national packaging Standardization Technical Committee organized representatives of Tetra Pak China (Beijing) Co., Ltd., Shandong Quanlin Packaging Co., Ltd. and other nine units to hold a meeting. It is planned to complete the two national standards of paper-based composites for sterile packaging of liquid food and paper-based composites for fresh-keeping packaging of liquid food (roof package) in October this year, Ensure that the submitted materials reach the Review Department of the National Standardization Administration Committee before the end of the year

in terms of packaging machinery, there are also many industry standards being drafted. For example, the Machinery Subcommittee of the national packaging Standardization Technical Committee plans to formulate national industry standards for 17 products, such as packaging machine 'target=u blank> transparent film three-dimensional packaging machine and hose filling and sealing machine

enterprises should become standard makers

usually, domestic enterprises are only the executors of a certain standard, but in fact, they should strive to become the main body of the standard and the maker and reviser, and strive to embody their core patented technology in industry standards, national standards and even international standards

enterprises should change from passive to active, and increase communication with national standardization departments and industry associations. Although it is impossible to directly formulate and revise standards at the beginning, they should also actively participate, so that they can not only understand the latest technological development and requirements of standards, but also realize the full size of the first piece this time (15 × 6 meters) the curing and demoulding of composite fuselage siding process parts can increase the opportunity for their own original technical patents to be written into the standard

in fact, more and more enterprises see the importance of guiding national and industrial standards and take action. For example, Foshan Nanhai Dongxing Plastic can Co., Ltd. has been responsible for drafting polyolefin injection packaging barrels and hazardous plastic pesticide bottles, which have been approved by the state and will be officially implemented nationwide in 2007. According to Luo Yizi, chairman of the company, considerable economic and social benefits have been achieved through the implementation of the standardization strategy: improving the level of enterprise management and the level of science and technology; Improve brand influence and brand image; Promote the production and operation development of enterprises; Promote the market to eliminate inferior products, safeguard the interests of consumers, and so on

Copyright © 2011 JIN SHI